Testo 606-2 Wood and Material Humidity Meter 0560 6062 Moisture Measure and NTC
Air Temperature Thermometer
Introduction:
606-2; wood and material moisture meter with built-in moisture measurement and NTC air thermometer, incl. protective cap, batteries and calibration protocol
Precise measurement of wood moisture with stored characteristics curves for
beech, spruce, larch, oak, pine, maple
Protective cap for safe storage
Air humidity measurement with the long-term stable Testo humidity sensor
Measurement of temperature and humidity in ambient air
In addition to material moisture, 606-2 also measures air moisture and temperature. In this way, drying conditions can be reliably assessed directly on-site
*Precise measurement of wood moisture with stored characteristics curves for
beech, spruce, larch, oak, pine, maple
*Additional characterisitic curves for cement screed, concrete, plaster, anhydrite screed, cement mortar,
lime mortar, brick
*Hold function for easy readout of readings
*Display illumination
*Self-test function
*Protective cap for safe storage
*Including wrist strap and belt holder
*Measurement of temperature and humidity in ambient air
*Air humidity measurement with the long-term stable Testo humidity sensor
*Incl. dewpoint calculation and wet bulb
II.Specification:
Storage temperature -40 to +70 °C
Operating temperature -10 to +50 °C
Battery type 2 batteries Type AAA (
not included
)
Battery life 130 h
Weight 90 g
Dimensions 119 x 46 x 25 mm
Probe type NTC
Meas. range -10 to +50 °C
Accuracy ±0.5 °C
Resolution 0.1 °C
Probe type Conductive measurement cell
Meas. Range 0 to 50%
Accuracy ±1%
Resolution 0.1
Probe type humid. sensor, cap.
Meas. Range 0 to 100 %RH
Accuracy ±2.5 %RH (5 to 95 %RH)
Resolution 0.1 %RH
Notes:Shipping company does not accept liquids and powders and dry batteries
